Aspects of fracture mechanics in cryogenic model design. Part 1: Fundamentals of fracture mechanics

The use of fracture mechanics for predicting fracture and fatigue crack growth in metals is presented

A study of fatigue and fracture in 7075-T6 aluminum alloy in vacuum and air environments

Axial load fatigue life, fatigue-crack propagation, and fracture toughness experiments were conducted on sheet specimens made of 7075-T6 aluminum alloy. These experiments were conducted at pressures ranging from atmospheric to 5 x 10 to the minus 8th torr. Analysis of the results from the fatigue life experiments indicated that for a given stress level, lower air pressures produced longer fatigue lives. At a pressure of 5 x 10 to the minus 8th torr fatigue lives were 15 or more times as long as at atmospheric pressure. Analysis of the results from the fatigue crack propagation experiments indicated that for small stress intensity factor ranges the fatigue crack propagation rates were up to twice as high at atmospheric pressure as in vacuum. The fracture toughness of 7075-T6 was unaffected by the vacuum environment. Fractographic examination showed that specimens tested in both vacuum and air developed fatigue striations. Considerably more striations developed on specimens tested at atmospheric pressure, however

Investigation of fatigue crack growth in Ti- 8Al-1Mo-1V /duplex-annealed/ specimens having various widths

Axial-load fatigue crack propagation tests on duplex annealed titanium alloy specimens having various width

Beliefs about brain injury in Britain

Primary objective: Surveys have revealed that a high proportion of the public in the US and Canada hold misconceptions pertaining to the sequelae of brain injury. This study examined whether similar misconceptions are endorsed by adults in Britain. Research design: Survey. Methods and procedures: Three hundred and twenty-two participants completed a 17-item questionnaire containing true or false statements about general knowledge of brain injury, coma and consciousness, memory impairments and recovery. Main outcomes and results: Regardless of age, sex, level of education and familiarity with brain injury, participants held mistaken beliefs about consciousness, were inclined to under-estimate the extent of memory deficits and were unaware that patients are more vulnerable and less resistant to further injury. A large proportion of respondents indicated that their knowledge of brain injury had been derived from the popular media. Conclusions: Similar misconceptions to those reported in previous studies exist in Britain. Notably in this study these misconceptions were endorsed by a greater percentage of respondents. Greater public awareness is needed for decisions concerning funding and patient care. It is therefore important for healthcare professionals and public health campaigns to dispel myths about brain injury

Relationships among the phases

The overall flare process involves phenomena characterized as the impulsive and gradual phases, following the X-ray signature first recognized by Kane (1969). In addition, evidence exists for a pre-flare phase in some flares, and recent Solar Maximum Mission data have shown that a post-flare phase, in which extensive and energetically important coronal activity occurs, may also exist. The data to describe the pre-flare and post-flare phases are insufficient to place them properly into an overall picture of the energetics, aside from noting that these phases may indeed be significant from the energetics point of view. What is presently known is reviewed and comments are made about the possible interactions among the flare structures involved

A compendium of sources of fracture toughness and fatigue crack growth data for metallic alloys, part 3

This Technical Memorandum presents sources of fracture toughness and fatigue crack growth data for metallic alloys. This is Part 3 of a three volume report

Stratospheric CCN sampling program

Two one liter grab samples of stratospheric aerosol were returned from each of six U-2 sampling missions. Cloud condensation nuclei (CCN) spectra from each sample were obtained. Interest was centered on the effects of volcanic activity. Spurious particle generation was found to be a serious problem in container 9 LFT and a much smaller problem in container 9 RT. Initial studies of an option for improved sample containers and values were completed. A CCN spectrometer, able to operate at an internal pressure of 300 mb, was designed

The collisional drift mode in a partially ionized plasma

The structure of the drift instability was examined in several density regimes. Let sub e be the total electron mean free path, k sub z the wave-vector component along the magnetic field, and the ratio of perpendicular ion diffusion to parallel electron streaming rates. At low densities (k sub z lambda 1) the drift mode is isothermal and should be treated kineticly. In the finite heat conduction regime square root of m/M k sub z Lambda sub 1) the drift instability threshold is reduced at low densities and increased at high densities as compared to the isothermal threshold. Finally, in the energy transfer limit (k sub z kambda sub e square root of m/M) the drift instability behaves adiabatically in a fully ionized plasma and isothermally in a partially ionized plasma for an ion-neutral to Coulomb collision frequency ratio

Single-strain-gage force/stiffness buckling prediction techniques on a hat-stiffened panel

Predicting the buckling characteristics of a test panel is necessary to ensure panel integrity during a test program. A single-strain-gage buckling prediction method was developed on a hat-stiffened, monolithic titanium buckling panel. The method is an adaptation of the original force/stiffness method which requires back-to-back gages. The single-gage method was developed because the test panel did not have back-to-back gages. The method was used to predict buckling loads and temperatures under various heating and loading conditions. The results correlated well with a finite element buckling analysis. The single-gage force/stiffness method was a valid real-time and post-test buckling prediction technique